Sinister SD-COOLFIL-6.0 Coolant Filter Kit
If you need a 6.0 coolant filtration kit, you definitely made the right choice by choosing MKM Customs. This Sinister coolant filtration system for the Ford Powerstroke filters a small amount of coolant with each pass. The spin on the filter makes it easy to change coolant as often as you need. Plus, the filters also remove all solid particles. Typically you will use three filters in the first nine months. Once the initial nine months has passed, you will only need to change the filter once a year.
6.0 coolant filtration kit? How about one coolant filter, ball valves, coolant filter assembly, and coolant hoses and clamps? You can view more images by clicking on underneath the large image above.
- 1 Coolant Filter
- Ball Valves
- Coolant Filter Assembly
- Coolant Hoses
- All Hose Clamps & Hardware for Installation
- Installation Instructions
The coolant filter should be changed out several time within the first year of having the coolant filter kit installed. The first filter should be changed out within the first 500 miles as it will catch the most debris. The second filter should be changed out at about 3000 miles. The third filter should be changed out after the first year. The intervals may vary depending on the amount of debris in the engine. We recommend cutting open the filters to determine how many times and how often the filter should be changed in the first year. If the filter is still very dirty after the second interval, you may want to do an additional filter change in between the 3000 mile mark and the end of the year. After the initial year, you should change the filter out once every year after that.