Mishimoto Baffled Oil Catch Can - Titan XD 5.0 Cummins 2016-2018
Mishimoto Baffled Oil Catch Can - Titan XD 5.0 Cummins 2016-2018

Mishimoto Baffled Oil Catch Can - Titan XD 5.0 Cummins 2016-2018

Write a Review
Your Price: $273.95
Part Number: mimMMBCC-XD-16CBE
Availability: Usually Ships in 24 Hours
Warranty Limited Lifetime
Keep the intake system in your 2016-2018 Nissan Titan XD 5.0L Cummins free from oil and debris with the Mishimoto MMBCC-XD-16CBE Baffled Oil Catch Can. The Mishimoto Oil Catch Can Kit features the tried and true Mishimoto design with several internal baffles to better separate oil from the crankcase vapors. Strategic positioning in the engine bay prevents condensation buildup in the catch can from freezing in cold climates. Two direct-fit hoses and an application-specific bracket make for a quick and simple installation. 

Mishimoto catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, they are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while Mishimoto catch cans trap the blow-by and keep it out of the engine permanently. When you see what's in the bottom of your catch can, you won't want that draining back into your oil either. 

Features: 
  • Direct Fit Mounting Bracket 
  • Fully Serviceable Catch Can 
  • Fully Sealed, Billet 6061 Aluminum 
  • Strategic Positioning Prevents Condensation From Freezing 
  • Oversized Catch Can Capacity Developed For Truck Applications 
  • Mishimoto Lifetime Warranty
Install Notes: 
Install Torque Specs: 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M). 

After installation, Mishimoto recommends checking the contents of the baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle 

Vehicles affected by Nissan service campaign #PC511 may require an ECU tune to use this catch can kit without a check engine light. The ECU re-flash performed under this campaign increases the sensitivity of the CCV pressure sensor and may lead the ECU to believe that a CCV hose is unplugged when using this kit. Please contact your dealer to verify if your vehicle has been re-flashed under this campaign.

Reward Points

274 points will be rewarded to you when you buy this item.

Related Items

TOP