7.3 Powerstroke PCM Port Chip Prep Pen

Introducing a J3 Port Prep Pen solution that is applied to the PCM rear terminals to quickly dissolve all coating for a near perfect clean every time!

Upon installing a Hydra, TS, Edge etc.. performance chip onto a PCM, there is terminal cleaning involved. Chip manufactures typically include a small scotch brite pad or a brass brush. These will work as long as you don't clean all of the way down to copper and don't get too aggressive with the cleaning. Sometimes it can be tuff getting all of the coating removed or you think it's clean enough, re-install PCM and still have a no start or vehicle shuts off intermittently.

We get many phone calls a day with connection issues and PCM failures due to improper cleaning, either over cleaned or under cleaned.

Take the guess work out with of our simple to use prep pen and not worry about over cleaned or under cleaned PCM terminals.

See our instructions for proper use of this port pen.

Note: Our prep pen includes enough solution to clean multiple PCMs.