One Piece UVC Harnesses & Gaskets 7.3 Powerstroke
Posted by Robert Breedlove on 2/13/2023 to
We continuously receive phone calls asking for help with an engine running issue that typically leads back to the one piece under valve cover gaskets and harnesses. This style of valve cover gasket has the harnesses built into them that cannot be removed from gasket. They are typically half the price of Ford Motorcraft or OE brands. These are cheap for a reason! Think twice before installing.
(0) Comments
CTS2 VS The All New CTS3 - Should you upgrade?
Posted by Robert Breedlove on 5/1/2020 to
We take a look at the all new CTS3 and compare it to it's previous version. Is it worth the upgrade?
4 Inch vs 5 Inch Exhaust Which is Better? - 7.3 - 6.0 Powerstroke
Posted by Robert Breedlove on 2/4/2020 to
We get this question quite often. Depending on your application and interest will determine what size is best for your Powerstroke.
All About the 6.0 Powerstroke FICM - Problems & Solutions
Posted by Robert Breedlove on 9/27/2019 to
The Fuel Injection Control Module was installed on all of the Ford 6.0L engines to operate the injectors from the command of the PCM. This setup was very similar to the...
7.3 Injector Comparison - Stage 2 180/80 VS Stage 3 205/30
Posted by Caylon Golden on 9/24/2019 to
Stage 3 205/30's will deliver the same, if not better power than a 180/80-100 all while doing it more efficiently.
How & Why - 7.3L Powerstroke Valve Train Upgrades
Posted by Robert Breedlove on 7/26/2019 to
To maintain the correct valve operation all of the valve springs must exert a certain amount of spring pressure. If they a low or weak they may cause the valves to not completely seal or float at higher RPM. Choosing the correct Valve Spring or Pushrod upgrades depends on...
7.3 Hydra Chip VS 7.3 TS Chip
Posted by Chris S. on 3/14/2019 to
So just what is the difference between the most popular 7.3 Powerstroke performance chips? We take a look at all the benefits and negatives of both in detail.
All About 7.3 Performance Injectors
Posted by Chris S. on 3/14/2019 to
When trying to decide what performance 7.3 injector is best for your application, you must start by evaluating where you want to be in horsepower, what supporting modifications you have, and what the main purpose you want for your truck.